Cerberus Massive Release Dildo

What ships in the box: the dildo itself (pink-white marbled silicone, realistic veined shaft with defined head), a squeeze bulb connected by tube, and a separate filling syringe. The syringe loads fluid into the internal reservoir, the bulb triggers the release through the tip on demand. Both tools are necessary - the syringe fills, the bulb fires.

Listed under the 11-inch size category. The realistic proportions follow standard anatomy: defined corona, veined shaft, flat suction cup base. Pink-white marbled silicone with no glow properties.

The Release System

Same mechanical principle as other pump-release dildos in the catalog: fill reservoir with syringe, connect bulb, squeeze to release fluid through the tip channel. Use water-based lube as the fluid for best results - it stays in place after release instead of running out immediately like water does. Warm the fluid beforehand for a temperature-realistic effect.

Fill and squeeze once to purge air before insertion, then top off the reservoir. If you skip the priming step, the first squeeze pushes air instead of fluid.

After each session: disconnect the bulb, flush the internal channel with warm water until output runs clear, then flush again. Stand the toy upright with the port open to air-dry the channel interior. Clean the syringe and bulb separately - warm soapy water through each, shake dry. The silicone body is boil-safe but the tube and bulb connectors should be hand-washed only. Water-based lube on the exterior, never silicone-based.

Buyers who want the release feature but in a shorter format should look at the 7-8 inch release pieces first. The full catalog carries realistic dildos with release systems at multiple size tiers.